Iridescent Color from Clear Droplets

Structural color from clear water droplets. Microscale water droplets condensed onto a clear plastic sheet reflect different bright colors based on their size. (Source: Zarzar Lab., PSU)

Under the right conditions, ordinary clear water droplets on a transparent surface can produce brilliant colors, without the addition of inks or dyes. This iridescent effect is due to structural color, by which an object generates color simply by the way light interacts with its geometric structure. Now, a team of researchers at Penn State and MIT describe how a surface covered in a fine mist of trans­parent droplets and lit with a single white light lamp can produce bright, iridescent colors if each tiny droplet is precisely the same size. This newly explained form of structural color could aid in the development of bril­liantly-colored cosmetics, color-changing paints, or adaptive camou­flage.

“The typical way you get color is with dyes or pigments, which have molecules that selectively absorb and scatter specific wave­lengths of light,” said Lauren Zarzar, assistant professor of chemistry at Penn State and a leader of the research team. “Structural color is different. It’s a product of light inter­acting with a material in a way that causes light inter­ference. Structural color is often iri­descent and the color we see depends on the angle we are looking from and the angle of the light. We see it in things like opals, butterfly wings, beetles, and bird feathers.”

The team first noticed the pheno­menon while studying transparent droplet emulsions made from a mixture of oils of different density and water-based surfactants – compounds that reduce surface tension in liquids and are used in soaps and detergents. They were observing the droplets’ inter­actions in a clear Petri dish, when they noticed the drops appeared sur­prisingly colorful, and the colors changed with viewing direction. Subse­quently, the team was able to produce the same color effect by simply allowing water droplets to condense on the lid of a Petri dish filled with warm water.

“We didn’t set out to discover this,” said Amy Goodling, a graduate student in materials science and engineering at Penn State. “We have been working with these droplets for a while because the combi­nation of oils and surfactants create droplets with a parti­cular internal structure. It wasn’t until we started making droplets that were uniform in size that the color became noticeable.” Where does the color come from? Initially, the researchers thought the color might be caused by the same pheno­menon that produces rainbows. Rainbows form when sunlight enters a spherical raindrop and is bent, or refracted, off the back of the raindrop, before reflecting back out at a different angle.

“Initially we followed the effect that causes rainbows,” said Sara Nagelberg, a graduate student at MIT who headed up the modeling effort to try to explain the effect. “But it turned out to be something quite different.” The droplets that produced color are not perfect spheres like those that form rainbows. Instead, both droplets of water that condense on a surface and the internal structure of the specialized oil and surfactant droplets have a hemispheric or dome-like shape. Light behaves dif­ferently in hemi­spheres than it does in spheres. Speci­fically, the curve of the hemisphere and the sharp change in refractive index between the inside of the hemisphere and outside of it allows an optical effect that is not possible in perfect spheres: total internal reflection.

Total internal reflection occurs when light hits a boundary between substances with different refrac­tive indexes at a specific angle such that one hundred percent of the light is reflected, rather than losing some of the light to refrac­tion. By contrast, rain droplets that form rainbows only reflect about five percent of the light that enters them. The rest of the light is trans­mitted. Once light makes its way into one of the hemi­spherical droplets, the researchers found that it can take different paths, bouncing two, three, or more times before exiting at another angle. The way light rays that have taken different paths through the droplet add up and interfere with each other as they exit deter­mines whether a droplet will produce color or not.

“It’s like kids making waves in a pool,” said Mathias Kolle, assistant professor of mechanical engi­neering at MIT. “If they do whatever they want, there’s no con­structive adding up of effort, and just a lot of mess in the pool, or low random wave patterns. But if they all push and pull together, you get a big wave. It’s the same here: If you get waves in phase coming out for a particular color, that color is more intense.”

The researchers developed a model that predicts the color a droplet will produce, given specific structural and optical conditions, such as the size and curvature of the droplets, along with the droplet’s total internal reflection. Nagelberg and Kolle incor­porated all these parameters into a mathe­matical model to predict the colors that droplets would produce. Zarzar and Goodling then tested the model’s predictions against actual droplets they produced in the lab. The model could be used as a design guide to produce, for example, droplet-based litmus tests, or color-changing powders and inks in makeup products, paints, or displays.

“Synthetic dyes used in consumer products to create bright colors might not be as healthy as they should be,” said Kolle. “As some of these dyes are more strongly regulated, companies are asking, can we use structural colors to replace poten­tially unhealthy dyes? Thanks to the careful obser­vations by Amy and Lauren at Penn State and Sara’s modeling, which brought this effect and its physical expla­nation to light, there might be an answer.”

Droplets with precisely controlled sizes lit from a single light source produce brilliant colors that shift from blue to green and yellow and red as you move around them. Changing the size and shape of the droplets changes the colors they produce. “What’s really cool, is that anyone can produce this affect with a few simple kitchen supplies,” said Zarzar. “In fact, you probably have already seen it when stretching plastic wrap over a container of warm food, or on the lid of a clear plastic container. It’s an everyday experience, not a pheno­menon that requires complex lab equipment to create, it’s just that until now, no one had thought to try to explain it.”

In addition to liquid droplets, the researchers 3-D-printed tiny, solid caps and domes from various trans­parent, polymer-based materials, and observed a similar colorful effect in these solid particles, that could be predicted by the team’s model. The research team expects that the model may be used to design droplets and particles for an array of color-changing applications. “There’s a complex para­meter space you can play with,” Kolle says. “You can tailor a droplet’s size, morphology, and obser­vation conditions to create the color you want.” (Source: PSU)

Reference: A. E. Goodling et al.: Colouration by total internal reflection and interference at microscale concave interfaces, Nature, online 27. Februar 2019; DOI: 10.1038/s41586-019-0946-4

Link: Group of Lauren Zarzar, Pennsylvania State University, Univercity Park

Speak Your Mind

*