High-Quality Single Photons for Quantum Computing

Illustration: A new single-photon emitter generates, at room temperature, more of the high-quality photons that could be useful for practical quantum computers, quantum communications, and other quantum devices. (Source: MIT)

Quantum emitters generate photons that can be detected one at a time. Consumer quantum computers and devices could poten­tially leverage certain properties of those photons as quantum bits (“qubits”) to execute compu­tations. While classical computers process and store information in bits of either 0s or 1s, qubits can be 0 and 1 simul­taneously. That means quantum computers could potentially solve problems that are intractable for classical computers.

A key challenge, however, is producing single photons with identical quantum properties. To improve the indis­tinguishability, emitters funnel light through an optical cavity where the photons bounce back and forth, a process that helps match their properties to the cavity. Generally, the longer photons stay in the cavity, the more they match. But there’s also a tradeoff. In large cavities, quantum emitters generate photons spon­taneously, resulting in only a small fraction of photons staying in the cavity, making the process inefficient. Smaller cavities extract higher percen­tages of photons, but the photons are lower quality, or “distin­guishable.”

Now, the researchers split one cavity into two, each with a designated task. A smaller cavity handles the efficient extraction of photons, while an attached large cavity stores them a bit longer to boost indistin­guishability. Compared to a single cavity, the researchers’ coupled cavity generated photons with around 95 percent indistin­guishability, compared to 80 percent indistin­guishability, with around three times higher efficiency.

“In short, two is better than one,” says Hyeongrak “Chuck” Choi, a graduate student in the MIT Research Laboratory of Electronics (RLE). “What we found is that in this archi­tecture, we can separate the roles of the two cavities: The first cavity merely focuses on collecting photons for high efficiency, while the second focuses on indistin­guishability in a single channel. One cavity playing both roles can’t meet both metrics, but two cavities achieves both simul­taneously.” Joining Choi for this research are: Dirk Englund, an associate professor of electrical engi­neering and computer science, a researcher in RLE, and head of the Quantum Photonics Laboratory; Di Zhu, a graduate student in RLE; and Yoseob Yoon, a graduate student in the Department of Chemistry.

The relatively new quantum emitters, known as “single-photon emitters,” are created by defects in otherwise pure materials, such as diamonds, doped carbon nanotubes, or quantum dots. Light produced from these art­ificial atoms is captured by a tiny optical cavity in photonic crystal – a nano­structure acting as a mirror. Some photons escape, but others bounce around the cavity, which forces the photons to have the same quantum properties – mainly, various frequency properties. When they’re measured to match, they exit the cavity through a waveguide.

But single-photon emitters also experience tons of environ­mental noise, such as lattice vibrations or electric charge fluc­tuation, that produce different wavelength or phase. Photons with different properties cannot be interfered, such that their waves overlap, resulting in inter­ference patterns. That inter­ference pattern is basically what a quantum computer observes and measures to do computational tasks.

Photon indistin­guishability is a measure of photons’ potential to interfere. In that way, it’s a valuable metric to simulate their usage for practical quantum computing. “Even before photon inter­ference, with indistin­guishability, we can specify the ability for the photons to interfere,” Choi says. “If we know that ability, we can calculate what’s going to happen if they are using it for quantum tech­nologies, such as quantum computers, communications, or repeaters.”

In the researchers’ system, a small cavity sits attached to an emitter, which in their studies was an optical defect in a diamond, a silicon-vacancy center – a silicon atom replacing two carbon atoms in a diamond lattice. Light produced by the defect is collected into the first cavity. Because of its light-focusing structure, photons are extracted with very high rates. Then, the nano­cavity channels the photons into a second, larger cavity. There, the photons bounce back and forth for a certain period of time. When they reach a high indistin­guishability, the photons exit through a partial mirror formed by holes connec­ting the cavity to a waveguide.

Importantly, Choi says, neither cavity has to meet rigorous design require­ments for efficiency or indistin­guishability as tradi­tional cavities, the quality factor (Q-factor). The higher the Q-factor, the lower the energy loss in optical cavities. But cavities with high Q-factors are technologically challenging to make. In the study, the researchers’ coupled cavity produced higher quality photons than any possible single-cavity system. Even when its Q factor was roughly one-hundredth the quality of the single-cavity system, they could achieve the same indistin­guishability with three times higher efficiency.

The cavities can be tuned to optimize for efficiency versus indistin­guishability – and to consider any constraints on the Q factor – depending on the appli­cation. That’s important, Choi adds, because today’s emitters that operate at room tempera­ture can vary greatly in quality and properties. Next, the researchers are testing the ultimate theoretical limit of multiple cavities. One more cavity would still handle the initial extraction efficiently, but then would be linked to multiple cavities that photons for various sizes to achieve some optimal indistin­­guishability. But there will most likely be a limit, Choi says: “With two cavities, there is just one connection, so it can be efficient. But if there are multiple cavities, the multiple connections could make it inefficient. We’re now studying the fundamental limit for cavities for use in quantum computing.” (Source: MIT)

Reference: H. Choi et al.: Cascaded Cavities Boost the Indistinguishability of Imperfect Quantum Emitters, Phys. Rev. Lett. 122, 183602 (2019); DOI: 10.1103/PhysRevLett.122.183602

Link: Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, USA

Speak Your Mind

*